Gunesed
HOME / A VISUAL GUIDE
Thoughtful ideas for the space you have.
AI-generated concept illustration
Gunesed
1 / 6
Ensure your wall is flat, sealed, and smooth. Maintain 8 to 15 inches of horizontal clearance from open gas flames unless shielded by a metal range guard, and avoid direct temperatures over 120°F.
AI-generated concept illustration
Gunesed
2 / 6
Never clean walls with dish soap, which leaves bond-breaking residue. Scrub the surface using TSP substitute or Krud Kutter, rinse with clean water, and let dry completely for 30 to 60 minutes.
AI-generated concept illustration
Gunesed
3 / 6
Countertops are rarely level. Measure up from the counter's lowest point and use a spirit or laser level to draw a pencil baseline. Align tiles to this guide and trim bottoms to fit dips.
AI-generated concept illustration
Gunesed
4 / 6
Cut off side tabs to create a square edge for corners. Peel down just 2 to 3 inches of backing liner to start, align to your baseline, and press seams firmly with a cloth or roller.
AI-generated concept illustration
Gunesed
5 / 6
Turn off power at the breaker and remove switch plates. Measure the electrical box location, cut the tile opening on a cutting mat, test-fit dry, adhere the sheet, and reinstall the faceplate.
AI-generated concept illustration
Gunesed
6 / 6
Warm tiles with a hair dryer 3 to 4 inches away for 15 to 20 seconds. Pull back slowly at a 30 to 45 degree angle to protect drywall, then clear leftover residue with isopropyl alcohol.
AI-generated concept illustration